Subaru Outback/Legacy 2.0TD Dpf Removal And tuning Advice

From PrecisionCodeWorks
Jump to navigation Jump to search

To manually reset the DPF soot level/ash counter (only), please follow this step by step procedure:

1. Start the engine without touching the brake or accelerator pedals

Within 4 seconds-

2. Switch the rear heated screen ON

3. Switch the headlights ON

4. Switch the rear heated screen OFF

5. Switch the headlights OFF

6. Switch the rear heated screen ON

7. Switch the headlights ON

8. Switch the rear heated screen OFF

9. Switch the headlights OFF

The DPF light should flash and then extinguish, leave the ignition on for a further 30 seconds and then switch off for 3 mins.