Volvo XC60 Tuning Advice

From PrecisionCodeWorks
Jump to navigation Jump to search

The Ecu can be found in the engine bay - Lift the bonnet - The Ecu will be on top of the air filter housing under a push on cowling - Lift the cowling off - Remove the retaining screw's - Unplug the Ecu - Then continue with programming using the K-line connector (as shown) in your tool pin out diagram.

Or:

The ecu is behind the n/s/f passenger front inner wheel arch lining - remove the key from the ignition - open bonnet - disconnect the battery - lift the vehicle and remove the n/s/f road wheel - remove the wheel arch liner - the ecu is fixed to the front of the vehicle in a plastic cowling - spray the edge connector plug with quick release oil to ease the release of it. Then continue with programming using the K-line connector (as shown) in your tool pin out diagram.

Volvo1.png

Volvo2.png